Were you aware that water pressure above 80 psi can actually cause a loud hammering sound to occur in your plumbing system? This can be easily resolved by installing a valve that can adjust the incoming water pressure. For more great expert tips, check out the rest of this article.

As the weather begins to get cold, attend to all of your exposed pipes by adding insulation to them. Pay particular attention to pipes located in crawl spaces and the outside walls of your residence. Taking this step will help ensure that your pipes continue to function throughout the winter.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe – this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

If you have issues with the plumbing making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.

Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.

If your toilet gets clogged, your plunger is not fixing it, and your water level inside of the toilet appears low, you can sometimes fix the problem by dumping warm water into your toilet at waist level (or maybe even a little higher). Repeat this once your water goes back to a lower level. Calling a professional drain cleaning Tucson plumber can get this fixed up quickly.

Keep the drain in your bathtub working well by pouring one cup baking soda into the drain quickly followed by about a cup of white vinegar. The combination will cause a chemical reaction, so just place a cloth or other object over the drain after pouring. Pause a few minutes, and then follow the mixture with boiling water. This simple solution can break up clogs caused by everything from hair to soap scum.

If you have problems with a slow drain, there are easier things you can do other than removing the pipes to clean it. There are certain tools made just for this purpose that you insert into the drain to loosen the clog so it washes away or grab it and remove it completely.

Check your toilet regularly for leaks. An excellent method of checking this is by dropping a few food coloring drops in the tank of the toilet. Watch the bowl part of your toilet, and if you start to see colored water, you will know you have something that has to be taken care of.

When getting an estimate from a plumbing contractor on a job, make sure to ask how long the written estimate is good for. For big jobs you usually want to get estimates from a few different plumbers. Knowing how long your estimate is valid will help you know what your time limit is for making a decision on who to hire.

Teach your children how to notice plumbing problems. Many parents handle plumbing issues without sharing that information with their children, who grow up not knowing anything about plumbing. Any time you make a small repair or notice a problem, call your kids in and explain what the problem is and what you are going to do. Educate them so they can make good decisions in the future.

In conclusion, you want to be sure that you know what all of the noises you hear coming from your copper pipes are. Some noises could be normal, some could mean that are more serious problems. Hopefully this article will help you determine what sorts of issues require your immediate response.